Accessories

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs

- End link locking point for extensive holding power - 4-sided 3t manganese steel chain links - 4 digit resettable combination over 10,000 codes - Patent pending lock head design - Combo Safe Program - Product dimensions: Length 90cm - Product weight: 3.75 lbs

- Ring Lock with PLUG-IN CAPABILITY - Non-Key Retaining (key can be removed from lock) - Key Retaining version available (key cannot be removed from lock while unlocked) - Includes 5.5mm plug-in chain - Ring lock and plug-in chain PREVENTS ROLL, RIDE, AND LIFT away theft - Plug-in options also include 10mm cable and 9mm chain - Kryptonite and AXA ring locks/plug-in options are compatible - 5.5mm steel chain links - 120cm long

The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.

Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g

Store and carry your Thule Epos Premium, well designed storage and carrying bag that protects you and your car when transporting and storing the Thule Epos bike rack.

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Topeak's PanoBike Speed & Cadence Sensor turns your smartphone, tablet, or any Bluetooth Smart Ready device into your personal trainer. Install the free PanoBike app, or any other Bluetooth-enabled speed/cadence app, and this water-resistant easy-to-mount sensor will get over 1800 hours of operation at a range up to 30 feet, telling you exactly how fast you're going and how quickly you're pedaling.

The RedLite 80 BT features 80 lumens and five lighting modes that can be wirelessly controlled via Bluetooth 5.0 by WhiteLite 800 BT or TetraBand BT. Bidirectional tool-free mounting with the included silicone strap for quick installation and removal on aero/round seatposts or seatstays - Battery: Li-Ion - Recharge Type: USB - Lumens: 80 - Lamp: Red COB 3W LED - Battery: 3.7V 1000mAh Lithium Ion (integrated) - Control: 5 modes (High 800 lm - 2.5hrs / Middle 400 lm - 5 hr / Low 200 lm - 9 hr / Blink - 200lm - 20 hr / Pulse 400 lm - 15 hr) - Charge/Charge Time: USB-C / 2 hr - Reserve Time: 0.5 hr - Mount: Strap mount fits aero or round seatposts (25.4 - 34.9mm), seatstay, and Topeak bags - Size: 3.2" x 1.5" x 1.3" - Weight: 51g. - Color: Black

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap

The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing

Specifically designed for up to an 8.5” tablet to provide ultimate protection against water and dirt. QuickClick handlebar mount (Fixer 9) is angle adjustable and holds the tablet close at hand.

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Topeak's Turbo Morph G is super portable so it can be carried on all your rides, yet still offers the pumping power of a good floor pump thanks to a padded T-handle, a long hose, a fold-out base to stand on, and a high-volume aluminum barrel with built-in gauge. A frame mount is included, too.

A healthful blend of vitamins, minerals and electrolytes provides healthy hydration on-the-go. - Naturally flavored with fruit oils and powders, and a touch of stevia leaf extract - Vitamin A, B Folate, B6, C, E, and D for health and wellness - Sodium, potassium, calcium, magnesium, and chloride for optimal hydration - 12 tablets per tube - Dissolve in 16oz of water

Whether bicycle racks or street lamps, the Steel-O-Chain 8807 offers maximum flexibility. At the same time, it offers high comfort with its automatic cylinder. This means that it locks as soon as the end piece is inserted. Active locking with the key is not necessary. Technology: - 9/32" thick square chain with textile sleeve that prevents damage to paintwork - The chain, the lock body and supporting elements of the locking mechanism are made of specially hardened steel Operation and use: - Good protection at medium theft risk - Recommended for securing good bicycles - The longer the chain, the easier the bicycle can be locked to a fixed object

The Ultra Mini 410 U-Lock is compact and combines high-quality materials with intelligent locking technology. What features does it have to protect against theft? A 12mm thick rounded shackle which is made of specially hardened steel – just like the body and structural parts of the locking mechanism. Combined with a high-quality locking cylinder which offers superb protection against tampering such as picking thanks to "double locking," the Ultra Mini 410 U-Lock is a reliable companion when you are out on your high-end bicycle. The lock passed the ice spray test with flying colors. Technology: - Hardened 15/32" round shackle - The shackle, body and the structural parts of the locking mechanism are made of specially hardened steel - The special, modern design of the lock body casing allows for optimum handling - High-quality locking cylinder for a high level of protection against tampering, e.g. picking Operation and use: - Good protection at medium theft risk - Recommended for securing good bicycles - The longer the shackle, the easier the bicycle can be locked to a fixed object

Axiom's Journey Rack w/Spring is made of light, rugged aluminum. It can handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags. It also has a platform on top, which adds strength and doubles as a mini fender, and a spring loaded bar to hold down your belongings.

Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

We looked to our exceptionally popular Phase One number plates for inspiration when we designed the new Phase One bike stand. Made from durable injection molded ABS plastic, these stands have two large carrying handles and a wide footprint for stability. They can be attached side-by-side to other Phase One bike stands to create a row of stands and have an adjustable slot width, so they fit most BMX tire sizes. Each stand comes with two side panels that can be customized with your number or sponsor stickers. Or, because they are the exact same dimensions as the Box large-size Phase One number plates, you can also use your custom number plate sticker so you can always find your bike stand in the pits. - Tire Size Approx. 1" to 2 1/2" - Weight 1206 grams / 42.6 ounces

Banjo Brothers' Expanding Rack Top Bag attaches to pretty much any rear rack (sold separately) and gives you serious hauling capability. This streamlined trunk is ideal for commuting, running errands, a long day in the saddle, or even a picnic—maybe all of them in one day! It's got plenty of space for extra clothes, food, and a camera. Thick padding pulls double duty by insulating your snacks and protecting your gear. The ripstop fabric upper and rugged ballistic bottom panel are tough enough for cross-country treks, too. Reflective accents provide 360 degrees of visibility and there's a clip for a taillight as well.

- Equipped with detachable top pocket with touchable window for your mobile phone - Two side pockets with their own inner pocket - Easy to attach by means of Velcro

Grocery Pannier that clips onto a standard rack. Has rain fly to keep water out and contents in! Folds flat when not in use and has tricky handle system. Uses 2 structure braces on the inside of bag when in use to keep the pannier sturdy while riding. 2 D-rings on each side of the pannier to attach shoulder strap! - 13" long x 6.5" deep x 10" tall (with an additional 4 inches with the use of the rain fly)