Write a Review

Ready to build your dream 'cross bike? Boone Disc frameset is built with ultralight 600 Series OCLV Carbon. It features a cyclocross-specific geometry, Rear IsoSpeed to smooth rough courses, and front and rear 12mm thru axle dropouts for better stiffness and handling. It's right for you if... You're lining up every weekend to race, and you're looking to build up a lightweight cyclocross bike (or a really sweet pit bike) so you can spend more time doing what you love: getting muddy and winning races. The tech you get A svelte, ultra-lightweight 600 Series OCLV Carbon frame with Rear IsoSpeed, an integrated cartridge bearing headset, internal cable routing, and a T47 threaded bottom bracket. Plus, a full carbon Trek Cross fork. Designed for 12mm thru axles and flat mount disc brakes. The final word There are a lot of carbon cyclocross frames out there, but there's only one with Rear IsoSpeed. Boone soaks up the fatiguing bumps in a 'cross course so you'll stay stronger longer and have enough energy after your race to party. Why you'll love it - This bike was designed with input from cyclocross royalty, including World Champion Sven Nys and U.S. National Champ Katie Compton - Carbon rules on the cross course—it's lighter, more forgiving, and more efficient than aluminum - The combination of Front and Rear IsoSpeed cuts down on the fatiguing impacts of rough courses and increases compliance, giving you more traction when it matters - Boone's cross-specific geometry and tube shapes make shouldering easy so you can dominate all aspects of a race, including run-ups

- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring - Clamp integrates with ODI Lock-On grips - 50g

Deluxe Nude was developed with the Scott development team to provide riders the ultimate RockShox remote rear shock that features Descend, Traction, and Lock modes. Light and efficient in true Deluxe style. - Descend—Open things up and enjoy the ride down - Traction—Factory tuned compression provides a stable pedaling platform and maintains grip at the tire - Lock—True Lockout, for all those sprint finishes

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

Clif Bars are a delicious source of healthy energy and are full of essential vitamins and minerals. Made with high-quality, organic ingredients, Clif Bars are a perfect go-to food whether you’re on the bike or just need a quick snack at the office. They contain 10 grams of protein and are made with real fruit, nuts, and whole grains. They contain no hydrogenated oils or artificial flavors.

Designed for intensive training, it is equally suitable for racing events. The Rubino Pro builds on the standard Rubino platform, utilizing the same exclusive 3C Graphene compound structure, long service life, puncture protection, and sharp handling traits, but substitutes a folding bead material for reduced weight. The Rubino Pro has long been a favorite for both training and racing, and with the addition of Graphene technology compounds, is more versatile than ever! - Graphene rubber compounds

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

Engineered for endurance riding, the ultralight Contact SL D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Ultra-light aluminum for optimal stiffness at a lightweight. - 38% more compliant and 16 grams lighter than the previous Contact SL D-Fuse handlebar. SPECIFICATIONS - Weight: 264g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Alloy

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

Searching for a V-Neck? Try another galaxy. The Whisky Stargazer T-Shirt delivers out-of-this-world cotton crewneck comfort in a constellation of sizes. Have fun exploring!

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges

• Plastic body w/ ball joint • Acrylic convex mirror • Press fit into bar end

Domane SL 5 is ready to take on rough roads and long miles with a ride that's smooth, sleek, and aerodynamic. The lightweight 500-series OCLV Carbon frame has rear IsoSpeed to smooth out bumps in the road and reduce fatigue, and an integrated cockpit for a setup that looks as good as it feels. It features a reliable Shimano 105 drivetrain, disc brakes for all-weather stopping power, and an easy-access internal storage compartment for stowing ride essentials. Plus, tire clearance for lofty 38c hoops lets you take on almost any road, from tarmac to light gravel. It's right for you if... You want a fast ride that's built for the long haul, and prefer the feel of vibration-damping, lightweight and carbon and road smoothing IsoSpeed. Rides might take you over smooth pavement, rough roads, and well beyond, and you want a bike with wide tire clearance and disc brakes to get you through it all. The tech you get A light and refined 500 Series OCLV Carbon frame and fork with road-smoothing rear IsoSpeed, powerful flat-mount disc brakes, a full 2x11 Shimano 105 groupset, and tubeless ready wheels with wider 700x32 tires. An integrated cockpit, internal storage, top tube mounts, and cable routing add to the bike's capability and sleek look. The final word Carbon, comfort, capability. Domane SL 5 is the dream bike for long rides. Its light and fast carbon frame, stable endurance geometry, and road-smoothing rear IsoSpeed keep you comfortable through long miles. You also get the added advantage of a higher-end Shimano 105 drivetrain and powerful disc brakes that let you run wide tires. Why you'll love it - The sleek all-new frame saves weight and gives you more free speed thanks to updated Kammtail tube shapes - This bike is super versatile, super smooth, and equally suited to all-day adventures on the open road, club rides, and racing - Road-smoothing rear IsoSpeed absorbs fatiguing bumps in the road for a smoother, more comfortable ride - A sleek internal storage compartment gives you a versatile spot to stow tools and gear, while top tube mounts let you cleanly bolt on a bag for all day adventures

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

Domane+ AL 5 is a lightweight alloy e-road bike that delivers an authentic road bike feel with the benefit of an electric boost. The intuitive and natural-feeling HyDrive pedal assist system lets you keep pace with friends, crush hilly terrain, or push yourself harder on training rides. - This e-road bike looks, rides, and feels more like a traditional road bike - The HyDrive pedal assist system has a hub motor for a more natural ride feel - Easily change ride settings and see important info like speed and battery level with the intuitive HyDrive Bluetooth controller - The stable Endurance Geometry delivers comfort and confidence - Double your range with a 250Wh plug-and-play Range Extender battery that sits in your bottle cage

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

MAIN STREET, SIDE STREETS OR FOREST TRAILS. YOUR CHOICES ARE LIMITLESS WITH THE VERSATILE ROVE. KEY PERFORMANCE FACTORS Dirt-Road Ready A suspension fork offers more comfort and control when you leave the pavement for gravel and trails. Stability and Control Responsive, reliable disc brakes help you keep your speed in check, even in wet weather. Useful Integrated mounts let you attach a rear cargo rack, and the low standover height makes getting on and off less a hassle when you're running errands by bike.

Straight-forward design gives the men's Covert Bike Glove a light feel, while the durable build offers years of bar-griping control. The moisture-wicking air mesh build sheds sweat to keep your hands cool and stretches for unrestricted flexibility. Durable, synthetic suede palms protect your skin if you end up sliding instead of riding. - Sublimated graphics - Breathable, 4-way stretch shell - Polyurethane abrasion panel - AX SUEDE RPET synthetic suede palm - Silicone gripper finger and thumb - Touch screen compatible - Microfleece thumb wipe - Polygiene Odor Control technology - Slip-on cuff

- DSP Bar Tape V2 features a new pattern, an upgraded polymer and a screw-in bar plug - The new pattern is more technical with a new design and multiple layers of depth - The polymer has new formula enhanced for more durability and comfort - The new plug provides a clean, tight finish.

The Bluegrass Prizma 3D gloves are designed specifically to add extra impact protection against the obstacles that are in your way. The 3D TPR prisms defend the knuckles and the top of the hand. Thanks to their ergonomic shape and refined internal seam construction you will keep your handlebars tight without distractions. - Four-way-stretch durable mesh on the upper construction - Slim-fit neoprene cuff ensures maximum durability and comfort - Adjustable strap wrist closure with silicon gripper leaves you with an individual fit - Silicon wrist gripper keeps it secure - 3D TPR prisms protect the knuckles and the top of the hand - Soft-touch covered thumbs to clean dirt and sweat from the face and eye-wear - Hollow overlay on thumbs maximizes durability and avoids long-ride blisters - Thumbnail reinforcement - Fade-resistant sublimated graphics for a modern look - Breathable perforated palm to improve ventilation and comfort - Silicone print on brake fingertips for a grip control - Capacitive seams keep you connected with your touchscreen devices

- Flexible mesh back - Slip-on neoprene cuff - Anti-slip silicone on index and middle finger - One-piece perforated palm - Microfiber nose wipe

Origin-8's Classic Pro Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. This sweet stem has a polished anodized finish for durability and style. Different lengths are available for customizing the reach to your handlebars.

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability. - 1/8" size, includes 98 links and 2 master pins - Colored chains are Teflon coated for low friction - Compatible with 8T driver and up - Links (links): 98 - Color: Pink - Width: 1/2 x 1/8" - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

- One piece alloy body with rubber surface for grip - Chromoly spindle - 574g pair (9/16")

Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.

Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.

• Hardened heat-treated links • Integrated heavy-duty flat tumbler lock w/ 2 keys • Weatherproof protective coating