Accessories

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

- Add to older versions of the SuperStand to extend height to accept 29er wheels

The Willworx ‘CONNECTORS’ allows the individual Superstands to be connected in an unlimited number of configurations to suit every bicycle shop layout, size, and display area. They can be staggered to the right or left, side by side, back to back, etc. Some of the configurations are shown here. The CONNECTORS also allow the Superstands to be adjusted closer or further apart, as required for some bicycles with wider handlebars, or to position the bicycles closer where minimum floor space is available. Parking the bicycle with the rear wheel and staggered allows more bicycles to be on display.

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

White Lightning's Chain Johnny solves the problem of how to transport and store your bike with the possible greasy mess. The Chain Johny uses a 2-ply rubber and nylon case with Velcro closures to slip over your drivetrain so the mess stays inside. Never worry about leaving greasy chain marks or tearing your upholstery again.

Safely stash tools, treats, keys, and other personal items in the Whisky Parts Co. It's the '90s Keg, featuring can't-miss-it color and an easy screw-down top. - Keeps frequently needed items secure and dry - 16 oz.

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Precision-machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small, pocket-sized tool allows for easy trail-side adjustments.

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

WPL Bio-Solvent Degreaser (473ml) is a powerful biodegradable solvent degreaser for eliminating contaminants and grease build-up from drivetrain parts. The non-toxic, petroleum-free, bio-based formula easily dissolves stubborn contaminants, leaving the drivetrain clean and efficient. Can be sprayed directly onto bicycle parts or used for isolated cleaning in chain cleaning tools or degreaser bins. - Premium bio-based formula made with natural ingredients - Powerful solvent easily removes grease and grime - For use on drivetrain parts with stubborn grease build-up and contamination - Easy spray trigger penetrates deep into moving parts

Absolute Bike Grease: WPL Absolute Bike Grease is a premium calcium-based grease of high thermal stability composed purely of bio-based oils and chemicals. The zero-toxicity formula is compatible with rubber and elastomers providing a working temperature range of -40°C to 120°C. The class-leading, ultra-slippery formula is a mechanic's choice for building bicycles with efficient movement constancy and elevated corrosion resistance. - Premium bio-based formula made with natural ingredients - Improve performance of moving parts with advanced friction-reducing properties - All purpose, waterproof assembly grease for bearings, bushings, wheels, and headsets - Working temperature range of -40°C to 120°C - Biodegradable, non-toxic formula is safe for rubber and rubber derivatives

Deep penetrating formula works quickly to remove stubborn grease and grime from drivetrains. Wipes away with no rinsing required

The original formula in a handy can which uses an 8" applicator hose for precise application for hard to reach spaces. - WD-40 multi-use offers one formula with five functions. It lubricates, penetrates, protects, removes, and displaces moisture - Safe on rubber, metal, wood and most plastics

WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.

For dry and arid riding conditions. - Special polymers form a dry film to protect your chain and repel dirt to maintain a clean, quiet drivetrain - Law prohibits Hazmat materials from shipping by air

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware

Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz

Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

Topeak's Mini 6 is a great way to take along the essentials in a tidy and super-light package! Its forged-aluminum body includes: 2, 3, 4, 5 and 6mm Allen wrenches, and a Phillips screwdriver.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!

- Two sturdy tire levers also work as a chain master link tool to remove and install chains - Includes a chain hook to make installation and removal easy - Features a valve core tool as well as a place to store a spare quick link

Don't let a broken chain put your bike out of commission. Topeak's Super Chain Tool is a great addition to seat packs and home tool boxes alike. It's made of hardened steel and includes 5 and 6mm Allen wrenches, a chain hook and a chain tool.

Topeak's TriBag keeps your gear handy so essentials are always within reach. This top tube pack sports a flap that folds over the opening to keep things in place while still allowing on-the-go-access. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars. Size - 14 x 10.2 x 4 cm / 5.5” x 4” x 1.6” (Medium) - 18 x 10.2 x 4 cm / 7.1” x 4” x 1.6” (Large) Weight - 59 g / 2.08 oz (Medium) - 72 g / 2.54 oz (Large)

The Third Eye Hardshell Helmet Mirror clips on to all hardshell helmets and many helmet visors. Its distortion-free, shatterproof glass mirror allows you to see what's coming from behind so you can ride defensively and safely.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

Special tools for building Surly Fat Bike wheels. - 56mm-wide spacer aids in dishing and truing Moonlander offset wheels - 35mm-wide spacer aids in dishing and truing Pugsley offset wheels

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Extend the life of your Dummy bags with this replaceable wear patch.

Surly Front Rack Hardware

The Surly Born to Lose Water Bottle offers premium real estate for your refreshment of choice. Shielded from unwanted odors, flavors, mold, and stains, your water won’t taste like whatever else you put in there last time. Available in 22 oz. and 26 oz. sizes

These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames