Car Racks

Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included

Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel

Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

This add-on to Thule's premium T2 Pro XT platform hitch rack allows 4 bike capacity (2"/50mm receivers only). - Lock bikes to the rack with the integrated cable lock - Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts - Secure bikes quickly without frame contact with the frame free ratcheting arm - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters

Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features: - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, e-bikes and fat bikes - Accommodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key System (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications: - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in

SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2

This fork mount roof rack can handle any bike. Really. That bike you’re thinking of? Yes. Featuring the 3 Way fork-mount system, the TRIO can handle any bike you own. Top that off with a slim line design, security system, and rugged good looks, and you have the most complete fork-mount rack ever designed. 3 Way Fork Mount System - 3 Way fork mount system can handle any bike you own - Fits 9, 12, 15, & 20 mm forks with size-specific adapters - Adapters included with the TRIO: 9x100, 15x100, and 15x110 - Additional adapters available Additional Details - Easy Fit: Mounts to most factory and all aftermarket cross bars (max crossbar size: 3.5” wide by 1.5” thick) - Carrying capacity: 1 Bike Capacity (45lbs max) - Aerodynamic & Low Profile - Integrated Cable Lock (locks both frame and rear wheel): Style and security all at seven pounds - Sliding rear tire strap - Weight: 7lbs

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars VOLKSWAGEN - Arteon 4-dr Sedan with Normal Roof 2019 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 4-dr Sedan with Normal Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in

Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars VOLKSWAGEN - Passat CC 4-dr Coupe with Normal Roof 2009 - 2017

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

Premium trunk-mount bike carrier provides robust attachment and fits wide range of vehicles, including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Bike protection and security with soft cradles that absorb road shock and vibrations - Vehicle and bike protection with integrated anti-sway system that prevents bike-to-bike and bike-to-vehicle contact - Accommodates a variety of bike frames/geometries including smaller kids bikes thanks to adjustable bike arms - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Bike arms fold down when not in use, and rack folds flat for easy transport and convenient storage - Easy to assemble with included tools - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 3 - Load capacity: 99 lb - Max bike weight: 33 lb - Dimensions: 31.5 x 30.7 x 33 in - Folded dimensions: 24 x 78 x 69 in - Weight: 19.6 lb - Carbon frame compatible - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle

The Original Pickup Truck Bike Hauler Pad For Traditional Tailgate Designs Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Dakine Pickup Pad. The Large model works best on traditional full-size tailgate designs and has tie-downs for up to seven bikes. The Small fits traditional midsize truck tailgates and has tie-downs for up to five bikes. A built-in security grommet lets you lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Padded tailgate protection - Works best on traditional tailgate designs - Individual bike anchor straps (7- Large; 5- Small) - Three web cinch straps - Access flap for tailgate handles - Cable lock compatible - Reflective logo - 1000D Recycled Polyester with UV/weather-resistant coating Dimensions: - Small: 54" (137cm) width for mid size trucks - Large: 60" (152cm) width for full size trucks

The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides. But don't worry, this thing still sings. - All metal construction - OneTap™ hydro-pneumatic tire arms - No frame contact - Patented FastFit™ tool-free wheel chock system - Patented PedalPivot™ - Patented Flatlock™ hitch cam - No Worries Limited Warranty - 2 – Bike capacity (Add-ons Available) - 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version - 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details) - 53” Max wheelbase - 5” Max tire width

The Original Pickup Truck Bike Hauler Pad For Late-Model Trucks With Rear-View Cameras Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Dakine Pickup Pad. The DLX pad fits modern tailgates with backup cameras. The Large model works best on full-size tailgate designs and has tie-downs for up to seven bikes. The Small fits midsize truck tailgates and has tie-downs for up to five bikes. A built-in security grommet lets you lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Padded tailgate protection - Large access flap for tailgate handles and rear-view cameras - Works best on new tailgate designs - Individual bike anchor straps (Large: 7; Small: 5) - Four web cinch straps - Cable-lock compatible - Reflective logo

Pair of EndCaps for Yakima JetStream bars.

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

Let Us Do the Lifting If you’re searching for the ultimate bike rack for eBikes, look no further than the Saris Door County. Powered by your vehicle’s 7-pin connection, the Door County is a full-service electric bike rack for electric bikes. Simply turn the key and press a button, and the Door County platform hitch rack effortlessly lifts eBikes into the transport position, and back down again. And when you’re on the road, the Door County keeps the electric vibe going with glowing tail lights, including running, brake and turn signals. As for your precious two-wheeled cargo, the Saris Door County can transport two bikes, up to 60 lb. per bike, and sports integrated locks. The Door County’s unique lobster claw-style bike holds easily adjust to accommodate common electric bike features, such as fenders and down-tubemounted batteries. Ferocious in name only, the Door County’s lobster bike claws are gentle on your bike’s paint and ensure peace of mind as you travel down the road. And when you’re ready to call it a day, the Door County folds for storage and convenient wheels make it easy to roll away. - Full-Service Hitch Rack: raises and lowers bikes with electric lift assist, eliminating the need to manually lift heavy eBikes. - eBike Friendly Bike Holds: unique “lobster claws” securely hold bikes without touching fenders or eBike battery mounts. - Complete Integrated Security: locks the rack to the car and the bikes to the rack, plus tail lights for enhanced visibility. - Roll & Ride: folds for compact storage and maneuvering, while built-in wheels make it easy to roll into place. - For use with 2” hitch receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). Bike Capacity - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 48". - Compatible with bike tires up to 3". Product Design - Electric platform style hitch rack. - For use with 2” receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). - Electric system raises and lowers bikes with rack-mounted turn-key controls and buttons. - Electric system powers tail lights (running, brake, turn signals) for extra visibility. - Electric system connects to vehicle via 7-pin bladed connection. - Lobster claw-style locks the bike by the frame, ideal for bikes with fenders or eBikes with down-tube mounted batteries. - Integrated locking secures rack to the car, and bikes to the rack. - Tilting feature allows access to rear of vehicle, even when fully loaded. - Rack trays fold inwards for compact storage. - Integrated wheels allow rack to be maneuvered when folded. - Wheel straps are provided for front and rear wheel for extra peace of mind. - 1-year warranty for electronics Product Dimension - Rack weight: 63 lb.

Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2" HoldUp EVO into a four-bike hauler. It's versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind. - Attaches to the 2" HoldUp EVO to carry two additional bikes - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Trays easily adjust to reduce bike-to-bike interference - Tilts down with bikes loaded for rear-of-vehicle access - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - ?Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Compatible only with 2" version of HoldUp EVO & HoldUp Product Specs: - Weight: 36.44 lbs. - Dimensions: L 27.00 in x W 42.00 in x H 8.00 in - Limited Lifetime Warranty

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Universal Hitch Base fits 1.25" and 2" receivers - Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 2 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

Ultimate bike protection and loading/unloading ease with the MHS Duo Add-On Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo Add-On platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 35 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheel bases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

Ultimate bike protection and loading/unloading ease with the MHS Duo Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 60 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheelbases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

The Original Pickup Truck Bike Hauler Pad For Late-Model, Full-Size Ford and Dodge Trucks Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Pickup Pad. The Dakine Pickup Pad DLX Curve is made to fit the curved shape and back-up camera location of late-model, full-size Dodge, and Ford tailgates. It has tie-downs for up to seven bikes and a built-in security grommet so you can lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Fits the curved tailgates of late-model, full-sized Ford and Dodge trucks - Padded tailgate protection - Large access flap for tailgate handles and rear-view cameras - Seven individual bike anchor straps - Four web cinch straps - Anti-theft construction - Reflective logo

Hollywood's SportRider SE2 rack uses padded universal top clamps and adjustable wheel holders to safely carry 2 bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. Plus, with an add-on kit (sold separately), the Sport Rider SE2 can bring along 4 bikes for your adventures. • Hitch Size: 2 inches • Max tire width: 3 inches • Max bike wheel base: 60 inches • Max weight capacity: 45 lbs per bike • Weight: 45 lbs • Not to be used on any trailer, fifth wheel, or towed vehicle

Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.

- Heavy-duty, rust-free AL6061-T6 construction - Mounts vertically or horizontally - Great for storage and transportation - Compatible with the following fork spacing: - 9mm x 100mm (Standard QR) - 12mm x 100mm - 15mm x 100mm - 15mm x 110mm (Standard Boost) - 20mm x 110mm - Includes all axle adapters and QR skewer - Use: Fork Mount - Hitch Size/Mount: 100/110mm Spacing

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.