Parts

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Crank boots designed for RaceFace Next SL G5 cranksets.

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 48T - Total capacity: 20T

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

- 42-34-24t and 48-38-28t compatible, suitable for most Shimano 3x7/8sp drivetrains - Top swing with alloy base bracket/clamp - Dual pull design is convertible between top-pull and bottom-pull cable routing - Multi-clamp insert converts the 34.9mm clamp to fit 31.8mm and 28.6mm seat tubes - For standard 66-69 degree chainstay/seat tube angles - 143g

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

• 5/6/7-speed rear derailleur • Highly affordable and reliable • SHIMANO Equivalent RD-TY21 / RD-A070 • 301 grams

Lock rings for all TRP Centerlock Rotors

Adapters to convert your flat mount frame or fork to post mount. - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor

For proper assembly. - For use with 2008-09 6-Series, 2008-10 5-Series, 2008-2011 4-Series Madones, District Carbon - Durable steel bearing housing

#901 7/8 top 10" x 1" - Seat Post Diameter: 13/16'' - Seat Post Length: 15.5'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°

- Ideal for fitness and comfort cyclists - A great replacement handlebar

The KMC B1H is a heavy-duty single speed chain offering a quieter riding experience with high pin power and an anti-drop design. Fully nickel plated for corrosion and abrasion resistance

Replacement lower hardware for Rockshox forks.

RockShox Seal Head Assemblies

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.

64BCD chainring for MTB cranksets

Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.

Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length

Claris R2000 series 8-speed chainrings are a reliable option for long touring, town cruising, and daily commuting. - Direct replacement for R2000/R2030 cranks - Hyperglide technology ensures smooth and reliable shifting - Compatible with 4-arm crank design

- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer

- Truvativ, Crank arm bolt, M12, Cromoly, Self-extracting for Howitzer, Bag of 2

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm

Saddle clamp heads and lowers for KS Dropper posts.

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams