Parts

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

- Replacement front cable hanger - Aluminum construction

• Designed for caliper & cantilever brakes • Steel construction • 22.2mm (7/8") clamp • 200 grams pair

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends

Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

-Seatpost clamp for Propel Advanced models (2013-2016)

Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link

The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link

- Eva foam provides excellent vibration damping, reducing road buzz - Blended natural cork, helps absorb sweat and resists heat caused by friction - Includes end-plugs and finishing tape

Disc Brake Service Kit for 05-07 Juicy - Includes pistons, seals, and bleed screws

Replacement lower hardware for Rockshox forks.

Replacement compression knobs for RockShox suspension forks.

Replacement compression knobs for RockShox suspension forks.

Replacement compression knobs for RockShox suspension forks.

RockShox Rear Shock Parts

RockShox XLoc Parts

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

Red eTap battery terminal cover

- Upper pulley has larger teeth for increased chain control

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx

Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.

Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors. Features: - Rim friendly compounds - Threaded steel post - Steel hardware Specifications: - Weight per pair: 56.9 grams - Overall length: 46.1mm - Pad contact width: 13.1mm

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

Saddle clamp heads and lowers for KS Dropper posts.

Sunlite's Gel Grips are soft and feature an ergonomic shape for premium comfort.

• Ergonomic shape • Soft Kraton Rubber material • 7/8" • 110mm

Is it time to change your grips? Check out Sunlite's Pro Gel Grips. They give you a solid grip, superb shock absorption and vibration damping.

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Steel 1/2 x 3/32 derailleur chain - For use with index shifting systems - For 7-/8-speed drivetrains - 300 grams - 132-link chain is extra long for bicycles like foot-forward-design cruisers

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

- Closed-end high-flange design - Non-slip dual density waffle pattern - Grey flange and end cap with a black center - Made from durable dual density kraton rubber - Length: 130mm

- Comfortable and durable kraton rubber with a micro diamond knurled surface - 130mm length with closed end and no flange - Flangeless design is suitable for MTB, BMX, or cruiser bars

- Comfortable and durable kraton rubber with a classic micro diamond knurled surface - 130mm length with closed end and BMX style flange

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The Keyboard grip's unique dual shot injection process allows to offer a grip with an extra soft and thin feel in your hand, but with a harder secondary inner layer to help resist tearing. Its 165mm length holds on nicely to the keyboard concept. Includes Odyssey Par Ends. Plus, it comes with emojis hand-picked by Aaron Ross. - Aaron Ross signature hand picked emoji pattern - Par Ends included

Travis Hughes’ signature design features a multi-directional ribbed pattern for superior grip and comfort no matter how your hand lands on it.

- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Origin-8's Ergo Torq II Grips provide a comfortable ergonomic shape with soft, dual compound Kraton rubber.

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.

Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x

Origin-8's Tri-Power Grips are made from soft, Kraton rubber for great comfort and excellent grip. They feature a tapered triangle-shaped pattern and a classic shape.

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts