Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$2.79 - $3.79
Replacement Axle nuts for three speed Sturmey Archer hubs.
$12.59
- Variable widths
- Left: 30.5mm
- Center: 52mm
- Right: 30.5mm
- Length: 113mm
- Overall: 134mm
$12.59
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 36mm
- Length: 120mm
- Overall: 141mm
$12.59
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 35mm
- Length: 119mm
- Overall: 140mm
$12.59
- Variable widths
- Left: 32mm
- Center: 52mm
- Right: 37.5mm
- Length: 121.5mm
- Overall: 142.5mm
$5.49
Rubber rim strips for 24-inch diameter fatbike rims.
- Sold individually
$16.99
- High performance adhesive tape, a great pairing with Velox Cement
- Each roll is usually adequate for gluing two tubular tires
- Protects tube from spoke/nipple/rim puncture
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs.
- 6mm spacer kit adapts 142 x 12mm rear hub to 148 x 12mm
- Includes 6mm adapter to 6-bolt rotors
- Includes external spline lock ring for thru-axle compatibility
$2.00
The Stolen rim strip features 30mm width and 20" diameter.
- Material: PVC
- Wheel Size: 20"
- Rim Strip Width (mm): 30 mm
- Adhesive: No
$206.00
Zipp Speed Weaponry Rear Axle Conversion Kit
- Not to be used on 188 V6 or earlier rear hubs
- Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed
$4.00
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
$6.50
- Strong nylon reinforced PVC for a secure fit
- Handles high-pressures; does not rot
- 0.5mm thick
$27.20
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$70.00
- Designed to stabilize 15g spokes in most hub flanges
- 1000-pack
$21.95
Authentic Ritchey hub conversion kit for mountain bike hubs.\
- Convert 15mm (OD) alloy axle to use a 9mm thru-axle
- End cap conversion for Vantage and Trail non 2-piece V2 hubs for QR
- Axle not included
$12.95
Authentic service bearing kit for Ritchey mountain bike and road wheels.
- Bearing service kit for Phantom Flange rear hubs Includes #6903 (x1pc) & #699 (x1pc)
$22.99 - $24.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$40.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors.
- Beautifully machined and hand-friendly
- Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter
- More than just eye candy, they’re hand candy, as well
- Weight: 44g
$50.00
Big Deal spoke nipple washers are not required for tubeless set up. When used, they eliminated the need for tubeless tape.
$61.30 - $79.10
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- Crafted from lightweight aluminum
- End Cap Sold Separately
- Weight: 39 g
$38.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and to perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes
$22.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 12x100.
Compatible with:
- HEX J-Type 32H non-Boost Front Wheels
Not compatible with:
- HEX 28 Straightpull or HEX Gravel Front Hubs
- HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters)
- SPIKE/OOZY/SPOON hubs
$42.99
A few too many drops to flat? Get your Arrow Rear Hub back in solid working order with this replacement axle/cone set from WeThePeople.
$406.00
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub.
- 187mm axle width
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Hollow Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 110mm - 1 axle per bag